BC9601 / BC9602 / BC9603
BIG & TALL GUEST CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts, screws and knobs are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
WEIGHT LIMITS
BC9601 - 300 lbs
(or less)
BC9602 - 400 lbs
(or less)
BC9603 - 500 lbs
(or less)
BC9601 / BC9602 / BC9603
CHAISE VISITEUR BIG & TALL
INSTRUCTIONS DE MONTAGE
© Office Star Products juin 2015
1
4
2
3
5
8
6
7
2
Back
2
1
Steel Bar
Back Screw
4
Sled Base
Seat Screw + Washer
8
Armrest Cover
2
Seat
1
Allen Wrench
1
1
4
2
3
5
8
6
7
2
Back
2
1
Steel Bar
Back Screw
4
Sled Base
Seat Screw + Washer
8
Armrest Cover
2
Seat
1
Allen Wrench
1
2
1L
3
4
6
7
5
ÉTAPE 1
ÉTAPE 2
ÉTAPE 3
1R
1R
1L
1
4
2
3
5
8
6
7
2
Back
2
1
Steel Bar
Back Screw
4
Sled Base
Seat Screw + Washer
8
Armrest Cover
2
Seat
1
Allen Wrench
1
ÉTAPE 4
Jambe
9
PIÈCE QTÉ
1.
Cadres de bras (1L et 1R) . . . . . . . . . . . . . .2
2.
Coussin du siège
. . . . . . . . . . . . . . . . 1
3.
Coussin du dossier
. . . . . . . . . . . . . . . 1
4.
Barre de support
. . . . . . . . . . . . . . . . . 2
5.
Vis courte
. . . . . . . . . . . . . . . . . . . . . 4
6.
Vis longues avec rondelles
. . . . . . . . . . 8
7.
Couvertures d’accoudoir
. . . . . . . . . . . . 2
8.
Clé allen (non représentés)
. . . . . . . . . . 1
9.
Capuchons de pied (en option)
. . . . . . . . 4
Les capuchons de pied sont recommandés pour
prévenir le maquage sur le plancher fini.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste
et vous assurer que les quantités des pièces sont correctes.
ÉTAPE 1
Fixer les cadres de bras (1L et 1R) au coussin du dossier (3) à l’aide de deux vis courtes (5)
pour chaque cadre de bras(1).
NE PAS SERRER ENTIÈREMENT LES VIS.
ÉTAPE 2
Attacher les Barres de support (4) entre le cadres de bras (1L et 1R), fixer coussin du siège
(2) au les barres de support (4) à l’aide de quatre vis longues avec rondelles (6) pour chaque barre de
support (4).
NE PAS SERRER ENTIÈREMENT LES VIS.
ÉTAPE 3
Retourner délicatement le siège en position verticale.
APPLIQUER UNE FORTE PRESSION
POUR ALIGNER LES PIÈCES ET SERRER ENTIÈREMENT TOUTES LES VIS AU MOYEN DE LA CLÉ
ALLEN (8).
Couvrir les trous dans cadres de bras latéral (1L et 1R) avec couvertures
d’accoudoir (7).
ÉTAPE 4
Glissez les capuchons de pied (9) en dessous du pied de chaise. Pousser les capuchons
de pied (9) fermement dans leur position le plus éloigné.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing the
maxiumum weight(s) indicated above. The EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric
is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net
, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
