17. FIRMWARE UPDATE
17
Firmware Update
Workswell MEDICAS system is supplied with the latest firmware. As me goes on, newer firmware could appear
in order to bring the user new func ons, improve the old ones or fixing bugs. For this purpose, the system allows
the user update the firmware.
To update Medicas, follow these steps:
1. Download the update file from h ps://workswell-thermal-camera.com/firmware-update/medicas/.
2. Copy the update file
update-medicas.tar
to USB flash drive, SD Card or internal SSD (make sure the
filename is correct).
3. Connect the memory with update to MEDICAS.
4. Select ADVANCED > SYSTEM > UPDATE.
5. Confirm the update installa on.
17.1 Firmware Update Process
A er the ADVANCED > SYSTEM > UPDATE choice is selected, the device will search all three storage devices for
valid update files. If an update file is found, the user will be prompted one last me to confirm or cancel the
update. Once the update is ini ated the camera will reboot. This may take several minutes.
Figure 17.1 – Update menu – firmware update available.
Warning
: Do not turn off the system and do not unplug the power supply during the firmware update
process! Damage to the system may occur!
E-mail and Web
support@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.2.0 EN, 28
th
May, 2020
All pictures are only for illustra on.
Real values may vary.
53