22. TROUBLESHOOTING
22.4 Reset to Factory Default
You can reset the MEDICAS to its factory default state with the pin bu on. Press the pin bu on for more then 5
seconds. The LED should start blink rapidly. Do not unplug the MEDICAS from power source during this process!
Factory default can help in some situa ons. Typically if some se ngs or update caused the MEDICAS to stop
displaying the image or other minor things like going back to previous working firmware version.
Factory default will not work if the LED is not emi ng light.
22.5 System Update
Make sure that your MEDICAS version is up to date. You can find informa on about the current version on
h ps://workswell-thermal-camera.com/firmware-update/medicas/
E-mail and Web
support@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.2.0 EN, 28
th
May, 2020
All pictures are only for illustra on.
Real values may vary.
61