7. SYSTEM ASSEMBLY
7.1.1.2 SAFETIS Outdoor Power Supply
Figure 7.2: Board power supply scheme
Connector
Function
J1
Not Used
J2
Heater Power
Supply
J3
Board Power
Supply (230VAC or
110VAC)
J4
Camera Power
Supply
J5
Not Used
J5
Not Used
(a) Power supply connector
table
Cable color
Terminals
Blue
(N) Neutral
Brown
(L) Phase
Yellow/Green
GND
(b) Connection of the 230Vac
power supply line
To power‐on the SAFETIS, connect the power wires to the board power supply connector J3 (230VAC or 110VAC)
as shown on the figure 7.2, following the connector labelling for polarity as explained in 7.3b. Connect the
camera to the J4 connector. J2 connector is heater power supply.
Note: Exceeding the input power range may cause damage to the SAFETIS.
SAFETIS Outdoor has power consumption 80W.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
12