10. ADMINISTRATOR MODE
Note
: Currently selected ROI gets highlighted.
In this panel, you can also:
set ROI name,
duplicate ROI ‐ duplicates selected ROI,
delete ROI ‐ deletes selected ROI.
Run image calibration (NUC)
10.4.4 Pan‐Tilt settings (SAFETIS Pan‐Tilt only)
This panel allows you to move the positioning system and save the position of the currently edited preset. When
the camera will measure using this preset, the system will move and point at the position you saved here. To set
the Pan‐Tilt position you can:
1. Move the system in 8 directions using directional buttons of this panel.
2. Save current position to the edited preset.
3. Recall previously saved position of the edited preset.
Figure 10.10: Pan‐Tilt editing panel.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
28
