9. ADMINISTRATOR MODE
9.4.2 Start‐Stop Measurement and Evaluation
In this mode, you can trigger the measurement in two ways:
1.
Two triggers
‐ start with one Start trigger and with one Stop trigger.
2.
One trigger
‐ start with Latch trigger in logical high state and stop with Latch trigger in logical low state.
You can specify:
Start Delay
‐ delay after the start‐trigger in milliseconds.
Figure 9.11: Start‐Stop Measurement and Evaluation example.
9.4.3 Continuous Evaluation
In this mode, you can trigger the measurement in two ways:
1.
Two triggers
‐ start with one Start trigger and with one Stop trigger.
2.
One trigger
‐ start with Latch trigger in logical high state and stop with Latch trigger in logical low state.
When the measurement is active, SMARTIS takes and evaluates one frame repeatedly with
Sample interval
period.
You can specify:
Sample interval
‐ time between captured images.
Start Delay
‐ delay after the start‐trigger in milliseconds.
Save Image
‐ saves image with log file which can be downloaded and evaluated later.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
25
