4. WARNING AND CAUTIONS
4
Warning and Cautions
4.1 Warnings
Before using the product, please check that there is no visible damage or malfunction. If there are any visible
signs of damage or other defect on the device, then on no account should it be installed or put into operation.
Any interference and non‐certified service operations into the product leads to an automatic loss of warranty.
4.2 Notifications
Do not use or store the device in conflict with the storage and operating conditions laid down in this manual
(only for hardware).
Do not point the infrared camera (with or without the lens cover) at strong energy sources, for example,
devices that cause laser radiation, or the sun. This can have an unwanted effect on the accuracy of the
camera. It can also cause damage to the detector in the camera.
Plug the camera to its own power source. Do not plug the camera into the same power source as drone’s
motors.
Do not use the Workswell SMARTIS system in temperatures higher than +50
◦
C (+122
◦
F). High temperatures
can cause damage to the camera.
Do not use the Workswell SMARTIS system in temperatures lower than ‐15
◦
C (+5
◦
F). Low temperatures
can cause damage to the camera.
Do not apply solvents or equivalent liquids to the cameras, the cables, or other items. Damage to the items
can occur.
Be careful when you clean the infrared lens. The lens has an anti‐reflective coating which is easily damaged.
Do not use too much force to clean the infrared lens. This can cause damage to the anti‐reflective coating.
The encapsulation rating is only applicable when all the openings on the all components of the system are
sealed with their correct covers, hatches, or caps.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
7
