7. GENERAL USAGE OVERVIEW
Operators
Operators are users with the privilege to control measurements sessions. Operators can change products (a set
of settings) and start or stop the measurement sessions.
They should watch over the measurements and progress.
7.1.4 Admin and Operator Modes
As with the two kind of users, there are two basic modes with different web pages on SMARTIS web server.
If administrator logs in to web server, the ”Admin Mode” starts. If operator logs in, the ”Operator Mode” starts.
Admin Mode
Admin mode takes the administrator through several tabs and web pages with settings. The administrator should
follow these tabs and create one or more operators and products.
Please refer to chapter 9 for further details.
Operator Mode
Operator mode is just a single web page. Upon operator logging, he can select some if his products and starts or
stops measurement sessions.
Please refer to chapter 10 for further details.
7.2 Products overview
For the broadest range of usage administrator can create several operators with their own settings.
Each operator can have several products ‐ a set of settings. The operator can select whatever of his products
starts the measurement with this settings.
There are just a few general settings like language, units, date, time etc. The rest is encapsulated in its own
product.
7.2.1 Measurement Modes
Measurement modes are a basic settings for each product. Again, to cover all kind of applications, several modes
can be chosen.
7.2.2 ROI
One of the most important settings is so called Regions Of Interests, or ROIs.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
14
