10. OPERATOR MODE
10.2 Work‐flow
The operator has just limited number of actions to do. Please, follow these steps to start and finish the measurement
session:
1. Select the product from the combo box.
2. Wait few seconds for the settings to be loaded and applied.
3. If ready, start the measurement by clicking on the
Start
button.
4. When the session is finished, stop the measurement by clicking on the
Stop
button.
5. Confirm your action by clicking the
Ok
button.
10.3 Measurement session
When the measurement starts, the SMARTIS saves the state and continue the measurement until stopped by
the operator or administrator.
10.3.1 Web server during measurement session
Even when the Internet browser is closed or the Ethernet connection fails, after reconnecting to the web server
the user is informed about the ongoing measurement and only the operator who started the measurement, or
administrator, can stop the measurement.
The SMARTIS will continue to evaluate the incoming digital inputs, calculate the measurements and set the
according outputs independently on the state of graphical interface or web server.
Thus the web server is only visualization of the actions and measurement.
10.3.2 Power cut during measurement session
When the power is disconnected during the measurement session, the SMARTIS will continue the measurement
on the next boot.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
42
