12. DATA TRANSFER
12
Data Transfer
During the measurement data are collected and saved according to settings. This can be either Log files with
history of measurements or thermal images.
User may want to download the data. The internal memory is also limited and once in a while may require to
delete outdated data.
The data are available through FTP server.
12.1 FTP Server
The FTP server can be accessed on the SMARTIS IP address on the standard port 21.
Parameter
Value
Protocol
Plain FTP
IP address
SMARTIS IP address
Port number
21
Loggin
Admin or users with their passwords
Permissions
Admin ‐ RW, users ‐ R
Table 12.1: FTP parameters
Administrator can log in as ”Admin” and his/her password, users can log in with their user names and passwords.
Administrator and users can copy files from FTP server, but only administrator can delete file on the FTP server.
12.1.1 Restrictions and warnings
The FTP server is available even during measurements, when SMARTIS can be doing critical operations. Thus,
following restrictions should be observe with caution:
Do not delete current log folders during measurement session.
Try to minimize the operations on FTP server during measurement session, since it can have negative
impact on the overall performance.
Folder ”seqs” is containing sequences recorded during ROIs creation, so they should not be manipulated
when administrator logged in.
If these restrictions are broken, it can cause unexpected behavior.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
46
