6. SYSTEM ASSEMBLY
6.2 Connec ng the system to a wireless video link or display
The Workswell WIRIS system is equipped with a standard HDMI video output. It can be connected to any wireless
video link or a display with HDMI input that supports WIRIS resolu on. It is recommended to use a display with
16:9 aspect ra o. For addi onal informa on about resolu on se ngs, please see the subsec on 9.6.2 Display.
Figure 6.1 – Connex wireless video link and DJI Lightbridge (not included)
The system can be connected to a wireless video link or a display using supplied lightweight HDMI cable.
6.3 Connec ng the system to a standard RC receiver
The Workswell WIRIS system is equipped with 7 digital inputs (standard servo male connectors). These inputs
allow user to control the system remotely during the flight.
The first two digital inputs serve as a naviga on bu ons in the menu. These two inputs are necessary for con-
trolling the whole system. The rest five digital inputs are customizable and can be used as a shortcut to selected
func ons of the system such as zoom, video recording, image capturing, etc.
It is recommended to use a joys ck for naviga on in system menu. If connected as recommended, then the
behavior of the joys ck is as shown on the following image.
More informa on about digital inputs can be found in sec on 7
Digital IO Ports
.
E-mail and Web
support@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 1.0 EN, 24
th
Jan, 2017
All pictures are only for illustra on.
Real values may vary.
10
