WORKZONE TITANIUM CDLID20, Instruction Manual

9

9

AFTER SALES SUPPORT

e-mail: info.aldi@positecgroup.com

1300 889 028 (toll free)

MODEL No.: CDLID20 • 63520 • 03/2019

g)  If devices are provided for the connection of dust extraction 

and collection facilities, ensure these are connected and 

properly used. 

Use of dust collection can reduce dust-related 

hazards.

h)  Do not let familiarity gained from frequent use of tools 

allow you to become complacent and ignore tool safety 

principles. 

A careless action can cause severe injury within a 

fraction of a second. 

4).  Power tool use and care 

a)  Do not force the power tool. Use the correct power tool for 

your application. 

The correct power tool will do the job better and 

safer at the rate for which it was designed.

b)  Do not use the power tool if the switch does not turn it on 

and off. 

Any power tool that cannot be controlled with the switch 

is dangerous and must be repaired.

c)  Disconnect the plug from the power source and/or remove 

the battery pack, if detachable, from the power tool before 

making any adjustments, changing accessories, or storing 

power tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally. 

d)  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool. 

Power tools are 

dangerous in the hands of untrained users. 

e)  Maintain power tools and accessories. Check for 

misalignment or binding of moving parts, breakage of parts 

and any other condition that may affect the power tool’s 

operation. 

If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power tools. 

f)  Keep cutting tools sharp and clean.

 Properly maintained cutting 

tools with sharp cutting edges are less likely to bind and are easier 

to control.