18
18
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: CDLID20 • 63520 • 03/2019
terry towel bonnet (7) will not absorb as much
wax on later applications.
9.4 Running your polisher and waxing a vehicle
1) To avoid splashing wax, always start and stop
the polisher against the surface to be polished.
2) Place the polisher against the vehicle and turn
the polisher ON by pressing the “I” on the On/
Off switch (2).
3) Apply wax in a straight line with either a side-
to-side or back and forth motion.
Always use broad, even strokes when applying
wax (See Fig. F).
4) Start applying wax to the flat surfaces (hood,
trunk and roof) first. Wax one section at a time
(See Fig. G).
5). After flat surfaces are covered with wax, you
can do the sides.
6). Apply wax in a thin, even coat. Too much wax does not add any
more protection and only makes the wax removal more difficult.
7). The random orbit motion of the buffer / polisher provides an
application that cannot be duplicated, not even “by hand”.
IMPORTANT:
Do not apply excessive pressure against the work surface
with the buffer / polisher. The random orbital motion feature on this
G
H
I
F
E
Summary of Contents for CDLID20
Page 30: ...This is a blank page ...
Page 31: ...This is a blank page ...
