Air Compressor
AFTER SALES SUPPORT
(toll free)
MODEL No.: PAP110 • 02/2019 63569
e-mail: info.aldi@positecgroup.com
AUS
13
1300 889 028
AUS
4. Using the Nozzle adapter to suit 3-piece nozzle set
The nozzle adapter to suit 3-piece nozzle set (8) enables you to use the
following additional capabilities of the tyre inflation device:
- Blowing up inflatable pools / boats / air mattresses with the help of
the universal adapter (11).
- Blowing up items with threaded valves (e.g. Boats) with the screw-on
valve adapter (12).
- Deflating large volume items. The deflating adapter (13) can be used
for this.
5. Using the Universal adapter/s for valves with diameter 6mm /
9mm
Insert the universal adapter for valves with diameter 6 mm (14) or
the universal adapter for valves with diameter 9 mm (17) into the
hose with valve adapter/connector (10) by pressing the air gun release
valve (23) and inserting into the hose end. Release pressure on the air
gun release valve (23) and ensure the fitting is secure. To remove the
universal adapter for valves with diameter 6 mm (14) or the universal
adapter for valves with diameter 9 mm (17), press down the air gun
release valve (23) and pull the relevant adapter outwards.
WARNING!
The following behavior may cause damage to the
power cord /cable.
- Passage points, where connection cables are passed through
windows or doors.
- Kinks where the connection cable has been improperly fastened or
routed.
- Places where the connection cables have been cut due to being
K
L
1
2
Operating Instructions
