15
Safety information
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed air and blasting guns
•
The compressor pump and lines can become very hot during operation. Touching
these parts will burn you.
•
The air which is sucked in by the compressor must be kept free of impurities that
could cause fires or explosions in the compressor pump.
•
When releasing the hose coupling, hold the hose coupling piece with your hand.
This way, you can protect yourself against injury from the rebounding hose.
•
Wear safety goggles when working with the blow-out pistol. Foreign bodies or
blown off parts can easily cause injuries.
•
Do not blow at people with the blow-out pistol and do not clean clothes while
being worn. Risk of injury!
Safety information for paint spraying
•
Do not process any paints or solvents with a flash point below 55° C.
There is a risk of explosion!
•
Do not heat up paints or solvents. There is a risk of explosion!
•
If hazardous liquids are processed, wear protective filter units (face guards). Also,
adhere to the safety information provided by the manufacturers of such liquids.
•
The details and designations of the Ordinance on Hazardous Substances, which are
displayed on the outer packaging of the processed material, must be observed.
•
Additional protective measures are to be undertaken if necessary, particularly the
wearing of suitable clothing and masks.
•
Do not smoke during the spraying process and/or in the work area.
There is a risk of explosion! Paint vapors are easily combustible.
•
Never set up or operate the equipment in the vicinity of a fire place, open lights or
sparking machines.
•
Do not store or eat food and drink in the work area. Paint vapors are harmful to
your health.
•
The work area must exceed 30 m
3
and sufficient ventilation must be ensured
during spraying and drying. Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying combustible or hazardous
materials.
•
Do not process media such as white spirit, butyl alcohol and methylene chloride
with the PVC pressure hose. These media will destroy the pressure hose.
Summary of Contents for PREMIUM HC520
Page 2: ...7 Utilisation C D F D1 D2 20 12 13 ...
Page 19: ...24 ...
