6
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
have your finger on the switch while carrying the power tool or if you
connect the tool to the power supply while it is switched on, this may
cause accidents.
•
Remove all adjusting tools or wrenches before you switch on the
power tool. Any tool or wrench in a rotating part of the tool could
cause injuries.
•
Avoid abnormal working postures. Make sure you stand squarely
and keep your balance at all times. This will enable you to control
the power tool better in unexpected situations.
•
Wear suitable clothes. Never wear loose fitting clothes or
jewelry. Keep hair, clothing and gloves away from moving parts.
Loose clothing, jewelry or long hair can be caught by moving parts.
•
If you can fit dust extraction devices and dust collection devices
to the tool, ensure that they are correctly connected and used
for the correct purposes. The use of a dust extractor can reduce the
dangers posed by dust.
4. Using and handling the power tool
•
Do not overload the equipment. Use the correct electric tool for
the job in hand. The correct tool will enable you to work better and
more safely within the specific performance range.
•
Do not use an electric power tool if the switch is defective. An
electric power tool that cannot be switched on or off is dangerous
and must be repaired.
•
Pull the plug out of the socket and/or remove the battery pack
before making any adjustments to the tool, changing accessories
or putting the tool down. These precautions will prevent the power
tool starting accidentally.
•
Keep unused electric tools out of the reach of children. Do not
allow people who are not familiar with the tool or who have not
read these instructions to use the tool. Electric tools are dangerous
if they are used by inexperienced people.
•
Look after power tools with care. Check that moving parts
function correctly and do not jam, and whether any parts are
broken or damaged such that they adversely affect the function
of the power tool. Have damaged parts repaired before you use
the tool. Many accidents are caused by poorly maintained electric
tools.
WZAS_14_4_1_Li_UK_SPK7.indb 6
30.07.12 08:49
