Storage
19
2. Undo the latches
5
and remove the motor head
4
from the vacuum with the
handle
2
(see
Fig. A
).
3. Lift the clamp ring
17
and then the reusable cloth filter off from the filter cage
19
(see
Fig. E
).
4. Remove the foam filter from the filter cage.
5. Preliminarily clean both filters by gently tapping or brushing the dirt off. This
should NOT be done indoors in the living areas.
6. Use a mild soap and water solution to wash the filters and rinse with clean water.
7. Allow both filters to air dry thoroughly before installing them back on the filter
cage.
After cleaning, check the reusable cloth filter for tears and small holes.
Do not use a damaged filter. Even a small hole can cause a lot of dust
to come out from the vacuum. Replace a damaged filter immediately
(see chapter “Replacing filters”).
Replacing filters
−
Replace the following filters when they are full or damaged, respectively.
Filter
Part number
Disposable filter bag
15
19-3100
Reusable cloth filter
16
19-1500
−
Contact the dealer for purchasing replacements.
Alton Industries Ltd.
Phone: 1-888-899-0146, 1-630-389-1032 or 1-855-782-6822
E-mail: info@altonindustries.com
Storage
All parts must be completely dry before being stored.
−
Always store the vacuum in a dry area.
−
Protect the vacuum from direct sunlight.
−
Store the vacuum so that it is not accessible to children.
−
The dust tank
7
should be emptied and cleaned.
−
The power cord
3
should be wrapped and hung on the vacuum.
−
The hose
9
and nozzles
12
,
13
and
14
can be stored in the dust tank.
−
Use the accessory holders
22
to store the extension wands
8
and/or nozzles
(see
Fig. I
).
Summary of Contents for 45151
Page 3: ...3 A 1 2 3 5 6 7 8 12 13 14 15 9 10 11 4 5 ...
Page 4: ...4 B C E D 10 11 7 9 8 8 16 17 18 19 9 6 1 2 3 ...
Page 5: ...5 F H G I 15 6 18 20 22 21 ...
Page 22: ...22 ...
