Air Brush Kit
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №.
TG212 • 07/2016 • 53633
(toll free)
AFTER SALES SUPPORT
(toll free)
Air Brush Kit
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №.
TG212 • 07/2016 • 53633
15
• Acrylic paints cannot be dissolved in water and therefore should only be
used for more permanent applications and when the user is familiar with
the Air Brush Kit.
NOTE:
Care must be taken when using acrylic paints, as solvents will be
required for cleaning.
Preparing the Air Brush Gun
This air brush kit contains 2 x paint vessels for use with the air brush gun
(15), and is fitted with a general purpose nozzle of 0.35mm.
a) 20cc Glass paint jar (12)
b) 5cc Metal paint cup (14)
Installing the 20cc Glass jar (12):
1. When using the 20cc glass paint jar (12), push
it up into the paint inlet connection (21) tightly
until it is secure (Fig J). The glass paint jar is held
in position by pressure / friction.
NOTE:
The 20cc glass paint jar (12) has a vent
hole (13) to allow air to enter the glass jar which
enables fluid to flow into the air brush gun.
Ensure it is clean and not blocked (Fig K).
2. Open the lid of the glass paint jar and fill with
the selected paint after thinning appropriately
according to the paint manufacturer guidelines.
Be careful not to overfill.
Installing the 5CC metal paint cup (14):
1. When using the 5cc metal paint cup (14), push it up into the paint inlet
connection (24) tightly until it is secure (Fig L). The 5cc metal paint cup
(14) is held in position by pressure / friction.
2. Fill the metal cup (10) with the selected paint after thinning appropriately
according to the paint manufacturer guidelines. Be careful not to overfill.
NOTE:
The 5cc metal paint cup (14) has no top so care must be taken not
to spill the paint from the metal cup both during use and also filling.
J.
K.
