Air Brush Kit
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №.
TG212 • 07/2016 • 53633
(toll free)
AFTER SALES SUPPORT
(toll free)
Air Brush Kit
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №.
TG212 • 07/2016 • 53633
23
Cleaning the Compressor
WARNING:
Ensure the compressor is turned off and unplugged from the
mains power before undertaking this task
1. To clean the casing of the compressor, carefully wipe the surface with
a soft cloth, dampened with a little water or a cloth dipped in water or
neutral detergent.
WARNING:
Never immerse the unit in water or any other liquid, and DO
NOT use abrasive cleaners, steel wool or abrasive materials or cleansers.
2. Release excessive air from the braided air hose (10) and drain all
remaining water out of the air outlet fitting/connection (7) from the
compressor.
3. Disconnect the air brush gun (15) from the braided air hose (10).
4. Periodically check all parts before reassembly.
Maintenance
WARNING! It is dangerous to use the compressor if it is damaged.
If the compressor is damaged, behaving abnormally or making strange
noises, call our Customer Service on 1800 909 909, or email help@
powertoolsupport.com for advice on repair before resuming normal
operations.
Maintenance and servicing of your air brush/compressor should only be
performed by one of our qualified Service Agents or a qualified technician.
Always ensure the on/off switch (1) is in the OFF position, as indicated by
an “O” on the on/off switch (1), and the compressor is unplugged from the
mains power before carrying out any maintenance or cleaning procedures.
Failure to do so may result in serious injury.
Maintain your compressor with care. Keep it clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect cords and air hoses periodically and, if damaged, have them repaired
by an authorised technician/ Service Agent.
