First use
17
5. If possible, hold on to the original packaging for future reference.
6. Dispose of any unnecessary packaging and shipping materials as described in the
section “Disposal”.
Preparation
WARNING!
Risk of injury!
There is a risk of injury if you use the compressor before having it properly and
completely prepared for use.
− Assemble all parts of the compressor and insert the oil plug as described
in the section “Preparation” before you use the compressor.
• If possible, have a second person help you assemble the compressor.
• Before assembly, make sure that you have enough room to assemble
the compressor.
• You need open-ended spanners with the sizes AF13, AF16 and AF17 for
the next assembly steps (not contained in package contents).
Mounting the wheels
1. Use a level, stable object to support the back part of the compressor, e.g. with a
tool box, so that the middle of the compressor is supported and you can mount the
wheels
9
on the wheel suspension
24
(see
Fig. A
and
C
).
2. Insert the axle screw
19
through the wheel from the outside.
3. Insert the open end of the axle screw further through the wheel suspension on
the compressor.
4. Put a washer
20
and a spring washer
21
on the axle screw.
5. Screw a nut
22
onto the axle screw until it is hand-tight.
6. Use the AF16 open-ended spanner to secure the nut
and use the AF17 open-ended
spanner to tighten the axle screw so that the wheel is securely mounted.
7. Repeat steps 2 to 6 to mount the second wheel.
Mounting the support feet
1. Use a level, stable object to support the front part of the compressor, e.g. with a
tool box, so that the middle of the compressor is supported and you can mount the
support feet
11
on the support foot suspension
12
(see
Fig. A
and
D
).
2. Put a washer
20
on the screw
23
.
3. From the hollow side, insert the screw through the support foot.
4. Screw the open end of the screw into the threading on the support foot suspen-
sion so that it is hand-tight.