J0Z-SP38-1016/90891
AFTER-SALES SERVICE
GB 0845 872 2740
www.coreservice.co.uk
IRL 019022605
• Wear hearing protection when drilling. The noise may cause hearing loss.
• Use the additional handles provided with the tool. Loss of control may lead to injuries.
• Hold the power tool by the insulated gripping surfaces when performing work where
the insert tool may come into contact with hidden wiring.
Contact with a "live" wire can
make metal parts of the tool "live" and give the operator an electric shock.
• Fix the workpiece using screw clamps or a vice. Non-secured workpieces may result in
injuries for the user or people nearby.
• Before working on walls, flooring or the like, ensure that all power lines in the working area
are switched off at the main switchbox.
• Before drilling, check the area where you want to drill a hole for any type of cables and
pipes (e.g. water, gas, electricity). Use a suitable device, such as a metal detector or power
line detector, for this purpose. In case of doubt, consult a qualified electrician or the
corresponding supply company.
• When drilling, the tool and workpiece can both heat up considerably. Leave them to cool
down sufficiently before processing. Wear suitable gloves.
Safety instructions for rechargeable batteries and chargers:
• The battery charger can be used by children aged 8 and above as well as by people with
reduced physical, sensory or mental capabilities or with a lack of experience and knowledge
if they are supervised or have been instructed on the safe use of the tool and understand the
resulting risks.
• Children must not play with the tool.
• Cleaning and user maintenance must not be carried out by
children without supervision.
• If the power supply cable of this tool is damaged, it must be replaced by the manufacturer
or its customer service or by a similarly qualified individual to prevent risks from occurring.
• Do not charge non-rechargeable batteries. Only charge the battery in well-ventilated areas.
• Only plug the battery charger into suitable sockets. Only charge the battery with the battery
charger provided.
• Only use the battery charger for the battery provided; do not use it to charge any other
batteries or non-rechargeable batteries.
• Protect the battery and battery charger from moisture.
• Do not operate the battery charger outdoors.
• Disconnect the battery charger from the power supply if it is not used and before it is
cleaned or repaired.
• Handle the battery with care. Do not allow the battery to fall on hard surfaces. Do not exert
any pressure or other mechanical loads on the battery.
• Keep the battery away from extreme heat and cold.
• Only charge the battery at an ambient temperature between 10°C and 40°C. A charged
battery can be used to power the drill/screwdriver at temperatures between 0°C and 50°C.
When the battery is not in use, store this in a dry place and at a temperature between 10°C
and 30°C.
• Do not open the battery or the battery charger and do not attempt to repair them. Should
parts be faulty, have them repaired by a qualified technician or send them to our customer
service department for repair. If the power supply unit or the power cable of the battery
