Workzone J0Z-SP38-1016 Operating Instructions Manual Download

Page: 24 / 25

16V LI-ION CORDLESS

DRILL/SCREWDRIVER

The guarantee shall last three years and begin on the day of purchase. Please retain the receipt as proof of purchase.

Faulty cordless drill/screwdrivers may be sent free of charge to the service address below during the

warranty period. You will then receive a new or repaired tool.

Before sending the tool to be repaired, please call customer services on the number supplied below. They will

provide you with a returns sticker to send your tool back to us free of charge.

Even after the warranty period has expired you may send the faulty tool to the address below for repair. Repairs carried

out following expiry of the guarantee period will be charged. This guarantee does not affect your statutory rights .

Your information:

Name __________________________________________________________________________________________ __

Address _________________________________________________________________________________________ _

___________________________

E-mail _________________________________________________________ __

Date of purchase* _________________________________________________________________________________ __

Place of purchase _________________________________________________________________________________ __

Description of the fault:

Please send the completed guarantee card to:

Unit A&B

Escrick Business Park

Escrick

York

YO19 6FD

Email:

support@coreservice.co.uk

Tel Great Britain: 0845 872 2740

Tel Ireland: 019022605

AFTER-SALES SERVICE

YEARS GUARANTEE

GB 0845 872 2740
IRL 019022605

MODEL: J0Z-SP38-1016,

11/2013

, 90891

www.coreservice.co.uk

Summary of Contents for J0Z-SP38-1016


























Search results

Summary of Contents for J0Z-SP38-1016

Reviews:

Related manuals for J0Z-SP38-1016

Brands by name

Popular brands

Workzone J0Z-SP38-1016, Operating Instructions Manual

Search results

Summary of Contents for J0Z-SP38-1016

Reviews:

Related manuals for J0Z-SP38-1016

Brands by name

Popular brands