Noise/vibration information
26
support@coreservice.co.uk
AFTER SALES SUPPORT
26
GB
IRE
GB
0845 872 2740
IRE
019022605
Noise/vibration information
WARNING!
Health hazard!
− Wear ear protection and suitable protective clothing when
working with the device.
Noise emission values
Sound pressure level LpA:
95 dB(A)
Measurement uncertainty KpA:
3 dB(A)
Sound power level LWA:
106 dB(A)
Measurement uncertainty KWA:
3 dB(A)
Vibration levels
Total vibration value at the handle
Hammer drilling in concrete ah, HD: 18.2 m/s²
Measurement uncertainty:
1.5 m/s²
The measurements were performed in accordance with EN 60745-1:2009+A11:2010 and
EN 60745-2-6:2010.
The specified vibration emission level was measured on the basis of a standardised
test procedure and can be used to compare power tools with one another.
The specified vibration emission level may also be used to initially assess the
exposure.
Attention!
While actually using the power tool, the vibration emission level may differ from the
level specified depending on how the power tool is used.
Safety measures must be defined to protect the operator. They must be based on an
assessment of exposure during actual usage conditions (all parts of the operating
cycle must be accounted for, e.g. periods when the power tool is switched off and
when it is switched on, but not operating under load).
Reduce the vibration risk by
- wearing protective gloves during use and
- limiting the working time and reducing the actual operation time.