background image

Safety

13

www.coreservice.co.uk

AFTER SALES SUPPORT

GB

 

0190 4727501

 

IRE

 

0190 22605

GB IRE

Safety notes for the compressor

ATTENTION! For your own safety, only operate the compressor after you have read the 

safety notes.

 

WARNING!

Danger of explosion!
Operating the compressor in an unsuitable location without adequate venti-
lation, at an unsuitable ambient temperature or in a room where dust, acids, 
vapours or flammable gases are present poses a risk of explosion.

 

− The compressor must not be operated or stored in a room where there are 

dusts, acids, vapours or flammable gases. It could explode. 

 

− Keep flammable substances away from the compressor.

 

− Only operate the compressor at an ambient temperature of at least +5 °C 

and no more than +40 °C. Starting the motor at temperatures below +5 °C 
poses a risk due to stiffness.

 

− Make sure that the ambient temperature in an enclosed working environ-

ment does not 25 C to ensure that the compressor continues to 
function properly when continuously and completely filled with air.

 

− Only operate the compressor in well ventilated rooms.

 

− Do not spray water or flammable liquids on the compressor.

 

WARNING!

Risk of injury!
The compressor is under pressure during operation and in an unvented state. Pres-
sure may be released if the compressor is damaged, connections have been separat-
ed or if unsuitable or damaged lines are used. There is a risk of injury.

 

− A compressor must not be used if it exhibits defects that pose a risk to the opera-

tors or third parties.

 

− Check the compressor for rust and damage before each use. Never operate the 

compressor if it is damaged or deformed. If you identify damages, contact our 
customer service department at the service address indicated on the 
warranty card.

 

− Do not separate any connections while the compressor is in a pressurised state.

Summary of Contents for PT15101201

































Reviews: