AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com
1800 909 909
24v Lithium-ion Cordless Drill with Hammer Action
MODEL: №. 51887 • 06/2016 • 51887
11
9
d) Position yourself to avoid being caught between the tool or side handle
and walls or posts. Should the bit become bound or jammed in the work,
the reaction torque of the tool could crush your hand or leg.
e) If the bit becomes bound in the workpiece, release the trigger
immediately, reverse the direction of rotation and slowly squeeze the trigger
to back out the bit. Be ready for a strong reaction torque. The drill/driver body
will tend to twist in the opposite direction as the drill/driver bit is rotating.
f) Do not grasp the tool or place your hands too close to the spinning chuck
or drill/driver bit. Your hand may be lacerated.
g) When installing a drill/driver bit, insert the shank of the bit well within
the jaws of the chuck. If the bit is not inserted deep enough, the grip of the
jaws over the bit is reduced and the loss of control is increased.
h) Do not use dull or damaged bits and accessories. Dull or damaged bits
have a greater tendency to bind in the workpiece.
i) When removing the bit from the tool avoid contact with skin and use
proper protective gloves when grasping the bit or accessory. Accessories may
be hot after prolonged use. Check to see that keys and adjusting wrenches are
removed from the drill/driver before switching the tool on. Keys or wrenches
can fly away at high velocity striking you or a bystander.
j) Do not run the drill/driver while carrying it at your side. A spinning drill/
driver bit could become entangled with clothing and injury may result.
WARNING! Some dust created by power sanding, sawing, grinding, drill/
driving, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
a) Lead from lead-based paints,
b) Crystalline silica from bricks and cement and other masonry products,
and
c) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
