13
AFTER SALES SUPPORT
www.einhell.co.uk
t
0044 151 649 1500
0044 1890 946 244
IRE
WAC 3050/1
03/2015
For domestic use only
Note:
The information in these instructions will help the operator to use
and maintain the compressor. If necessary, arrange for another person to
help.
•
Open the packaging and take out the device with care.
•
Remove the packaging material and any packaging and/or
transportation braces (if present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for transport damage.
•
If possible, keep the packaging until the end of the guarantee period.
Important
The equipment and packaging material are not toys. Do not let children
play with plastic bags, plastic sheets and small parts. There is a risk of
choking and suffocating!
Assembly
Once the compressor has been unpacked and checked to ensure that it is
in perfect condition and has not been damaged in transit, the following
steps must be taken. An open-end wrench or ring wrench (14 mm and 17
mm) is required for assembly.
If not already done:
Fitting the wheels
Fit the supplied wheels as shown in Fig. F.
Fitting the supporting feet
Fit the supplied feet as shown in Fig. G.
Replacing the oil sealing plug
Remove the transportation cover from the oil filler opening with a screw-
driver and insert the supplied oil sealing plug (12) into the oil filler open-
ing (Fig. H).
WAC_3050_1_EX_GB_SPK7.indb 13
16.10.14 11:34
