7
AFTER SALES SUPPORT
www.einhell.co.uk
t
0044 151 649 1500
0044 1890 946 244
IRE
WAC 3050/1
03/2015
16.
Repairs may only be carried out by a qualified electrician.
Repair
work must only be carried out by a trained electrician, otherwise the
equipment may cause accidents.
17.
Noise.
Wear ear muffs when you use the compressor.
18.
Replacing the power cable.
To prevent injury, damaged power
cables may only be replaced by the manufacturer or a qualified
electrician.
Special safety rules
•
Make sure that the ambient temperature in an enclosed work area
is no higher than +25° C in order to ensure that the machine works
properly when fully charged with air for a prolonged period of time.
•
No connections may be unscrewed when the tank is under pressure.
Always make sure that the tank is empty.
•
Do not make holes or rivet joints in the tank or deform the
compressed air tank.
•
Always pull the plug from the socket prior to transport and before
carrying out any maintenance or cleaning work on the compressor.
•
Do not spray the compressor with water or inflammable liquids.
•
No inflammable objects must be situated near the compressor.
•
Please do not store or use the compressor and accessories in an
environment in which there may be a risk of explosion.
•
When the compressor is switched off, turn the pressure switch to “0”
(OFF).
•
Never direct the air stream at persons or animals.
•
Do not transport the compressor when the tank is under pressure.
•
Caution: Some compressor parts, such as the head and the leads, can
reach high temperatures. To avoid burns, do not touch these parts.
•
Always use the handles to transport the device.
•
Keep children and animals well away from the area in which the
device is used.
•
If you use the compressor with end devices for painting:
a) Do not work in enclosed areas or near naked flames.
b) Make sure that the work area is adequately ventilated.
c) Cover your nose and mouth with a suitable mask.
•
Do not use the compressor if the power cable or plug is damaged.
Have the damaged part replaced with an original part at an
authorized service centre.
WAC_3050_1_EX_GB_SPK7.indb 7
16.10.14 11:34
