8
AFTER SALES SUPPORT
www.einhell.co.uk
t
0044 151 649 1500
0044 1890 946 244
IRE
WAC 3050/1
03/2015
•
If the compressor is set up on an elevated surface, it must be securely
fastened to ensure that it cannot fall down during operation.
•
To avoid injury and prevent damage to the compressor, do not put
objects or hands through the safety grille.
•
To avoid serious damage and personal injury, do not direct the
compressor and accessories towards people, things or animals.
•
Always pull the plug out of the socket when the compressor is not in
use.
•
Make sure that pneumatic lines are always used for compressed air
and that they are suitable for the maximum operating pressure of the
compressor.
•
Do not attempt to repair damaged lines.
Mains connection
•
The motor is equipped with an overload switch (15). If the compressor
overloads, the overload switch will switch off the equipment
automatically to protect the compressor from overheating. If the
overload switch triggers, switch off the compressor using the On/Off
switch (3) and wait until the compressor cools down. Then press the
overload switch (15) and restart the compressor.
•
Long supply cables, extensions, cable reels etc. cause a drop in
voltage and can impede motor start-up.
•
At low temperatures below +5° C, sluggishness may make starting
difficult or impossible.
WAC_3050_1_EX_GB_SPK7.indb 8
16.10.14 11:34
