Workzone WB 16-2.0, User Manual

Operation

21

− Only use the enclosed drill bit for metal, wood and plastic. 

Inserting tools 

1. To clamp in one of the drill bits 

11

 or a bit 

12  

in the quick-action drill chuck 

1

, 

turn it counterclockwise (see 

fig. D

). This will open the quick-action drill chuck. 

2. Select 

•  the suitable drill bit and insert it in the quick-action drill chuck. 

•  the suitable bit and insert it with the hexagonal side in the quick-action drill 

chuck.

3. Turn the quick-action drill chuck clockwise until tight (see 

fig. D

). 

Removing tools

1. Turn the quick-action drill chuck 

1

 counterclockwise (see 

fig. D

). 

2. Take the tool out of the quick-action drill chuck and store it properly in the  

storage case 

13

. 

Screwing and drilling

1.  If you would like to drill or screw into soft wood, mark the applicable area. 
2.  Push the rechargeable battery 

6

 all the way into the rechargeable battery holder 

until the rechargeable battery locks into place. 

3.  Insert a drill bit 

11

 or a bit 

12

 (see chapter “Inserting tools”).

4.  Turn the torque adjustment ring 

2

•  to the 

 symbol (drilling) if you would like to drill into wood, plastic or metal. 

Do not use this setting when screwing.

•  to the desired torque if you would like to screw: 

Low torque: small screws and sensitive materials. 

High torque: large screws and robust materials.  

The torque adjustment ring will then audibly lock into place. 

5.  Use the gear switch 

3

 to select 1st or 2nd gear. Do not push the On/Off switch 

9

and the gear switch simultaneously to avoid damaging the cordless drill. 
Speed 1: 0 to 400 rpm 
Speed 2: 0 to 1600 rpm
Speed 1 is suitable for screwing and drilling a large bore diameter. 
Speed 2 is suitable for drilling a small bore diameter.

6.  Set the rotation direction of the quick-action drill chuck using the right-handed/

left-handed rotation selector 

5

: Select right-handed rotation (arrow pointing  

towards the quick-action drill chuck) so that the quick-action drill chuck turns 

clockwise. Select left-handed rotation (arrow pointing away from the quick-action 

drill chuck) so that the quick-action drill chuck turns counterclockwise.