After use
23
10. Afterwards, push the On/Off switch while applying more pressure.
The rechargeable battery may heat up depending on the load. Let the rechargeable
battery cool off meanwhile.
11. Hold the On/Off switch down until you have finished your work.
12. If necessary, change the direction of rotation of the quick-action drill chuck with the
right-handed/left-handed rotation selector to remove the drill bit from the bore
hole.
13. Let the cordless drill cool off completely once you have finished work.
14. Remove the drill bit or the bit (see chapter “Removing tools”).
15. Push the rechargeable battery release button
8
and pull the rechargeable
battery out of the cordless drill.
16. Store the cordless drill and the accessories properly in the storage case
13
.
Removing a blockage
Follow the steps below to remove a blockage:
1. If the cordless drill engages a blockage, release the On/Off switch
9
and pull the
drill bit out of the drill hole.
2. Check whether the blockage is caused by the cordless drill by briefly pushing
the On/Off switch. Do not point the drill bit towards yourself or other persons and
animals.
• If it is not possible to start the cordless drill, follow the instructions in chapter
“Troubleshooting”, point 1.
• If the cordless drill is working properly, follow the next steps in this chapter.
3. When screwing, set the torque adjustment ring
2
to a higher torque.
4. Push the On/Off switch all the way down and apply some pressure to the cordless
drill.
5. Take occasional breaks and take the drill bit out of the drill hole so that the drill bit
can cool off.
6. Repeat steps 4 to 5 until the blockage has been removed.
After use
1. Switch the cordless drill off by releasing the On/Off switch
9
.
2. Set the right-handed/left-handed rotation selector
5
to the intermediate position
to prevent it from unintentionally activating.
3. Push the rechargeable battery release button
8
of the rechargeable battery
6
and pull the rechargeable battery out.
4. Let the cordless drill cool off completely.
5. If necessary, remove the fitted tool.
Summary of Contents for WB 16-2.0
Page 4: ...4 1 9 16 1 3 A B 1 2 3 4 5 8 6 9 10 7 12 13 11...
Page 5: ...5 1 9 16 1 3 C 1 9 16 1 3 D 7 10 13 6 3 2...
Page 34: ......
