Storage
28
Checking the condition of the grinder
Regularly check the condition of the drill. Among other things, check to make sure:
− that the switches are not damaged,
− that the accessories are in proper condition,
− that the mains cord and the mains plug are not damaged,
− the housing of the motor
3
is free and clean. If necessary, use a soft brush to
clean it.
If you identify any damages, you must have them repaired by a specialist
workshop to prevent risks.
Storage
1. Clean the drill thoroughly before you put it into storage (see chapter “Cleaning”).
2. If possible, store the clean drill and the accessories in the original packaging.
3. Make sure that the storage room should is not accessible for children and the
storage temperature is between 5 and 30 °C.
Transport
− The drill is heavy. If possible, carry it with two people. With one hand, grasp under
the base plate
10
and hold the drill column
7
of the drill with the other.
Do not carry the drill by the motor
3
or the machine head.
− If you transport the drill with a vehicle, you secure it using tension straps to
prevent slipping.
− When transporting it over larger distances, disassemble the drill and transport it
in the original packaging.
