Troubleshooting
29
Troubleshooting
Problem
Possible cause
Solution
The drill cannot be
switched on.
The mains plug has not been
inserted in a socket.
− Connect the mains plug
with a properly installed
socket.
The protective hood
1
is not closed and locked in
place.
− Make sue that the protective
hood is closed properly and
locked.
The drill bit /
the tool hardly
penetrates the
workpiece that is
clamped in place.
The drill bit / the tool is not
suitable and/or is not in
good order and condition.
− Use a suitable drill bit / a
suitable tool.
The right speed has not been
selected.
− Set the correct speed.
Technical data
Model:
WZ-TB 13 L
Article number:
97015
Operating voltage:
230 V~, 50 Hz
Output:
S1 300 W · S2 500 W
Short operation:
S2 15 minutes; then the drill has to cool off
Protection class:
I
Weight:
16.4 kg
Motor speed:
1450 rpm
Output speed:
300-2410 min
-1
Speeds:
9
Chuck adapter:
B 16
Toothed ring drill chuck:
1.5-13 mm
Max. drill depth:
50 mm
Throat depth:
115 mm
Drill column diameter:
∅
46 mm
Height:
625 mm
Drilling table (W × H):
182 × 170 mm
Base plate (W × H):
314 × 200 mm
