Safety
8
Wear a dust mask.
Wear ear protection.
If applicable, wear a hair net or cap to prevent your hair from getting
caught in rotating parts.
This device complies with protection class I.
VORSICHT ! - LASERSTRAHLUNG !
Nicht in den Strahl blicken!
Laser Klasse 2
λ: 650 nm; P: < 1 mW
nach EN 60825-1: 2014
Products marked with this warning notice are laser devices
of class 2 with a wavelength of 650 nm and comply with EN
60825-1:2014. You may not look directly into the beam emitted
by these products or use optical instruments to view them.
Safety
Proper use
The drill is only suitable for hobby and DIY tasks for drilling materials such as stone,
wood and metal. It must not be used to drill into work materials that are hazardous to
health such as asbestos.
The chuck is suitable for drill bits and tools with a shank diameter from 1.5 up to a
maximum of 13 millimetres and cylindrical tool shank. Tools with a taper shank (MK2)
can also be used.
The drill must not be operated continuously for more than 15 minutes. Afterwards, the
drill must cool off before it is used again.
The drill may only be used by adults.
Any other applications are expressly prohibited and are deemed improper use.
Neither the manufacturer nor the retailer can accept any responsibility for injury, loss
or damage caused by misuse of this product of any kind.
Examples of misuse are given in the following non-exhaustive list:
• Using the drill for other purposes than those which are intended;
• Failure to observe the safety instructions and warnings as well as the assembly,
operating, maintenance and cleaning instructions contained in this user manual;
• Failure to comply with any regulations relating to accident prevention,
occupational medicine or safety which specifically and/or generally apply to the
use of this drill;
