Instructions
6
15
GB
IRE
WZEN 20
0151 649 1500
1890 946244
www.einhell.co.uk
AFTER SALES SUPPORT
14
Stapling textiles, materials, leather, etc.
Press the head of the Electric Staple Gun against the object where you
want to staple and operate the trigger.
Stapling wood strips
Use only nails to staple wood strips. Do not press the Electric Staple Gun too
firmly against the wood strip or you might damage the surface.
Filling level indicator (Fig. 1)
The filling level indicator (6) shows you if there are still enough staples or
nails in the magazine (5). If necessary, refill the magazine (5) as described
above. Avoid operating the trigger (1) if there are no staples or nails in the
magazine (5).
Cleaning, maintenance and ordering of spare parts
Always remove the mains power plug from the wall socket before starting
any cleaning work.
Cleaning
•
Keep all safety devices, air vents and the housing free of dirt and dust as far
as possible. Wipe the equipment with a clean cloth or blow it with
compressed air at low pressure.
•
We recommend that you clean the tool immediately after you use it.
•
Clean the tool regularly with a dampened cloth and some soft soap. Do not use
cleaning agents or solvents; these may be aggressive to the tool’s plastic
parts. Ensure that no water can get into the interior of the tool.
Maintenance
There is a risk of staples becoming jammed particularly when the Electric
Staple Gun is held at any angle when operated. In this case, switch the tool
off immediately and pull the power plug.
IMPORTANT: Always remove the mains power plug from the wall
socket before doing any work on the Electric Staple Gun.
Summary of Contents for WZEN 20
Page 20: ......
