background image

6

  Using, and the treatment of electric tools

     Do not overload your tool. Only use suitable electric tools to perform your 

work. Using the right electric tool allows you to work better and more 

safely within the tool’s quoted capacity range.

 

     Do not use an electric tool with a defective ON / OFF switch. An electric 

tool that can no longer be switched on or off is dangerous and must 

be repaired.

      Do not use this tool if the Power Cord is damaged. Have the cord repaired 

by an authorised specialist. Do not attempt to repair the cord yourself 

before making any adjustments to the tool, changing accessories or 

putting the tool down. This precaution eliminates the possibility of 

inadvertently starting the tool.

• 

   This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience 

and knowledge, unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible for their safety.

• 

   Supervise young children to ensure they do not play with the appliance.

• 

   Take good care of your tool. Check that moving parts properly function 

and do not jam, that parts are not broken off or damaged in any way and 

that the tool can be used to its full capacity. Have damaged parts repaired 

prior to using the tool. The cause of many accidents can be traced back to 

poorly maintained electric tools.

     Keep your blades sharp and clean. Properly maintained blades with sharp 

edges jam less frequently and are easier to use.

      Make sure to use electric tools, accessories, attachments, etc. in accordance 

with these instructions. Take the conditions in your work area and the job 

in hand into account. Using electric tools for applications other than those 

intended can lead to dangerous situations.

 Service

     Have your tool repaired only by authorized specialists using original 

replacement parts. This will ensure that your tool remains safe to use.

General Information

and Safety Instructions

 

2

GB

IRE

WZEN 20

0151 649 1500

1890 946244

www.einhell.co.uk

AFTER SALES SUPPORT

Summary of Contents for WZEN 20





















Reviews: