World Class Catamarans
3-7
ACCESSORIES
Electrical accessories include all lights, pumps, and gauges assembled into your catamaran. Certain accessories
are standard to each model, while others are optional equipment. Below is a list of accessories and their function.
Beside each accessory is a list of the boats on which the item is standard. For information on optional equipment see
Chapter 5 in this manual.
NAVAGATIONAL LIGHTS
Per USCG guidelines, all powered vessels must have navigational and anchor lights. Every World Cat is
equipped with navigational lights at the bow, a pole light near the stern, or mast light on the hardtop. These
lights must be used in accordance with USCG regulations when anchored or underway.
COCKPIT LIGHTS
Activated by the control system, cockpit lights are located at floor level and in boxes to provide light while
operating in low light conditions,
CABIN / CONSOLE LIGHTS
Lights located in the cabin or console have integrated power switches. They are tied directly into the fuse
block.
SPREADER LIGHTS (HARDTOP OPTION ONLY)
Attached to the hardtop, spreader lights illuminate the cockpit in low light situations. They are operated using
the switch on the radio box panel.
SPOT LIGHTS (HARDTOP OPTION ONLY)
Located in the hardtop, these are directional lights for use during night operation. They are operated using the
switch on the radio box panel.
OVERHEAD LIGHTS (HARDTOP OPTION ONLY)
Located in the hardtop, these provide down lighting during nightime use. They can be used in 3 color modes,
including red, white, and blue. To operate use the momentary switch on the radio box panel. Push up for walk-
way lights and down for centerline lights. Circuit protection is provided on the fuse block.
RIGGING LIGHTS
Located in the fihboxes and aft rigging compartments, these lights allow for visiblity during low light opera-
tion. They are operated using the switch on the radio box panel
BILGE PUMP / FLOAT SWITCH
Bilge Pumps evacuate standing water in the bilge. They can be operated manually from a switch at the dash, or
automatically by the float switch. The float switches are connected to the fuses along the top of the battery
management panel.
RAW WATER PUMP
Supplies pressure to the raw water system. It is activated by a switch and contains a pressure switch similar to
a residential well pump. You can leave this appliance on at all times while underway.
FRESHWATER PUMP
Supplies pressure to the freshwater system. It is activated by a switch and contains a pressure switch similar to
a residential well pump. You can leave this appliance on at all times while underway.
