Step 1
Assembly Steps
Page 5
(T-2) Phillips Screwdriver
(H-2) Cam Screw x 9
A
Front
Step 2
Install and secure Left Side Panel (D-1) and Right Side Panel (D-2) to Bottom Panel (B) using Connecting
Screws (H-3). Secure Divider Panel (C) to Bottom Panel (B) using Connecting Screws (H-3).
Engage all screws by hand first and then fully tighten them using Allen Key (T-1)
(T-1) Allen key
(H-3) Connecting Screw x 9
T - 2
H - 2
Place Top Panel (A) upside down onto a padded, non-marring surface. Install Cam Screws (H-2) into the
pre-drilled holes on Top Panel (A) Fully tighten using a Phillips screwdriver (T-2) (not included).
Set the Top Panel assembly aside until Step 4.
Front
B
H - 3
D-1
D-2
C
