Page 7
Step 5
After installing All Cam Locks (H-1), ensure the Top Panel (A) is fully seated down onto the Left / Right Side
Panels (D-1/D-2) and Divider Panel (C), and the three Doors (F1, F2 & F3) and their pivot hinges are all properly
engaged. Once confirmed, fully tighten all Cam Locks (H-1) by turning clockwise using Allen Key (T-1) until they
are snug. DO NOT over tighten Cam Locks.
T - 1
Insert Cam Locks (H-1) into the Left/Right Side Panels (D-1/D-2) and the Divider Panel (C) following the
orientation directions above.
The arrow on the Cam Lock (H-1) must point towards the Cam Screw (H-2) when first inserting the Cam Lock.
There are three Cam Locks per each of the panels.
(T-1) Allen key
(H-1) Cam Lock x 9
Step 5.3
Lock
Step 5.2
Step 5.1
Insert Fully
Follow Arrow direction
