Assembly Steps
Step 1
-
Lay the Headboard (A) upside down on a non-marring surface (packing foam).
-
Align holes on the Leg (B)
with corresponding holes on the back of Headboard (A).
-
Secure each Leg (B) using 3 Allen Bolts (H-1), Spring Washers (H-6) and Flat Washers (H-5), stacking the
hardware in the order as illustrated. Repeat the process for the other Leg (B).
-
Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
-
Using a second person to assist you, carefully turn the headboard assembly upright.
Step 2
-
Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
-
NOTE:
Headboard is designed to fit most standard bed frames. The hardware provided is not a comprehensive
solution for all frame types. Consult a professional or hardware store to determine the hardware needed for your
specific application.
Page 4
(H-1) Allen Bolt x 6
(H-5) Flat Washer x 6
(H-6) Spring Washer x 6
H1
H5
A
B
T1
H6
FRONT
T1
