WORLD TECH ELITE STRIKER-X, Instruction Manual

INSTALLING THE MEMORY CARD

USING THE DRONE CAMERA

CAMERA INDICATOR LIGHT

Flip the drone upside down. Take the included memory card and make sure the gold contact points are facing you. Insert the 

memory card into the camera until it clicks into place.  To remove the memory card, push it into the camera until you hear a 

click and the memory card will pop out. If the drone is turned on and the memory card is properly installed, the light inside the 

camera will turn solid blue.  The light will flash red and blue when no memory card is installed.

Make sure the both the drone and transmitter are turned on, the memory card is properly installed and the transmitter is 

synced with the drone.

NO LIGHT:

BLUE/RED LIGHT FLASHING:

SOLID BLUE LIGHT:

FLASHING RED LIGHT:

RED LIGHT FLASHES ONCE:

Drone is powered OFF
No memory card
Memory card is installed correctly, camera is ready.
Recording Video
Taking Photo

Recording Video:

  Press the VIDEO button once on the transmitter. The 

camera indicator light located inside the camera will start flashing RED when 

recording video. Press the VIDEO button again to stop recording video.

Taking a Photo:

  Press the PHOTO button once on the transmitter. The 

camera indicator light located inside the camera will flash RED once when a 

photo is taken.

NOTE: YOU CAN NOT TAKE A PHOTO WHILE RECORDING VIDEO

9