World Vision
QUICK GUIDE FOR DECO WORLD VISION
Thank you for purchasing the WVT50C HD receiver. It is supplied already configured
so that it is very easy to install it yourself. Simply by connecting you can enjoy over
200 TV and radio channels. If you change the channel list at any time, when you turn
on your receiver you will see a message announcing the change, and asking if you
want to accept the new list, you must select and press YES from your remote
control.
Connect the antenna cable to RF IN and the power adapter supplied to the power
supply and DC 5V / 1A to the receiver. If your TV has HDMI you should use an HDMI
cable for best results, plug one end of the cable into the receiver's HDMI jack and the
other end into the corresponding jack on your TV. In this case, you do not have to
make audio connections because the HDMI connector has stereo audio output or
Dolby Digital audio. If you have a standard definition TV, connect one end of the
SCART cable to the SCART connector on the back of the receiver and the other end
to a SCART connector on your TV.
Now you can comfortably watch and receive digital broadcasts of music, news,
movies and cable sports in your office or at home.
You can save TV and radio channels and organize them into favorites, with the
search, delete, move and sort functions. You can also record using the timer or direct
recording by connecting a USB memory or USB hard disk
The menu is very modern and supports multiple languages. All functions can be
performed using the remote control and some of the functions can also be
performed using the front panel. The HD Receiver is easy to use and adaptable to
future developments. If you have any difficulties regarding the Cableworld Operation
of your HD receiver, refer to the corresponding section of the instruction manual
found in the box, including 'Troubleshooting'. This manual will provide you with
