ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 114
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
NAME
Access
(R/W)
Possible value on the serial
port of the unit
Comments
INPUT.MPX2.ALARM
R/W
"NONE" or "FAULT" or
"WARNING"
Alarm generated upon loss of signal on the input
INPUT.MPX2.DRIVE
R/W
-6.00...6.00
Drive setting, allows an increase of the input audio level
without changing the deviation setting.
INPUT.MPX2.GET_SAMPLING
R
0…200000
Gives the sampling rate in Hz
INPUT.MPX2.LEVEL
R/W
-18.00...+18.00
Internal numerical gain
INPUT.MPX2.LOST
R
"YES" or "NO"
Detection of silence on the input after timeout. If ‘Yes’,
an alarm may be sent depending on the setting for
INPUT.MPX2.ALARM.
INPUT.MPX2.PEAK
R
-
150…150
Gives the deviation max peak value of the transmitted
signal in kHz over 100 milliseconds
INPUT.MPX2.PKMAX
R
-150...150
Gives the deviation max peak value of the transmitted
signal in kHz over 1 second
INPUT.MPX2.PRESENCE
R
MO" or "MO+R" or "MO+R+S"
or "ST" or "ST+R" or "ST+R+S"
Gives the composition of MPX2 on channel 3. R = RDS ;
MO = Mono ; ST = Stereo ; S = SCA
INPUT.MPX2.SW.PRIO
R/W
0..7 ; 0=disabled
Priority of each audio channel (4= highest priority)
INPUT.MPX2.SW.THRESH
R/W
-
90…000
Silence triggering level in dBFS
INPUT.MPX3.ALARM
R/W
"NONE" or "FAULT" or
"WARNING"
Alarm generated upon loss of signal on the input
INPUT.MPX3.DRIVE
R/W
-6.00 to 6.00
Drive setting, allows an increase of the input audio level
without changing the deviation setting.
INPUT.MPX3.GET_SAMPLING
R
0…200000
Gives the sampling rate in Hz
INPUT.MPX3.LEVEL
R/W
-18.00...+18.00
Internal numerical gain
INPUT.MPX3.LOST
R
"YES" or "NO"
Detection of silence on the input after timeout. If ‘Yes’,
an alarm may be sent depending on the setting for
INPUT.MPX3.ALARM.
INPUT.MPX3.PEAK
R
-
150…150
Gives the deviation max peak value of the transmitted
signal in kHz over 100 milliseconds
INPUT.MPX3.PKMAX
R
-
150…150
Gives the deviation max peak value of the transmitted
signal in kHz over 1 second
INPUT.MPX3.PRESENCE
R
MO" or "MO+R" or "MO+R+S"
or "ST" or "ST+R" or "ST+R+S"
Gives the composition of MPX3 on channel 3. R = RDS ;
MO = Mono ; ST = Stereo ; S = SCA
INPUT.MPX3.SW.PRIO
R/W
0..7 ; 0=disabled
Priority of each audio channel (4= highest priority)
INPUT.MPX3.SW.THRESH
R/W
-
90…000
Silence triggering level in dBFS
INPUT.MPX34.SW.BACKDELAY
R/W
XXX=[0…30]
Back delay on the channel with the highest configurable
priority.
INPUT.MPX34.SW.DELAY
R/W
XXX=[1…180]
Switching delay when loss on the MPX input
INPUT.MPX34.SW.NOSYNC
R/W
"ON" or "OFF"
If ON, switches on loss of AES synchro
INPUT.MPX4.ALARM
R/W
"NONE" or "FAULT" or
"WARNING"
Alarm generated upon loss of signal on the input
INPUT.MPX4.DRIVE
R/W
-6.00...6.00
Drive setting, allows an increase of the input audio level
without changing the deviation setting.
INPUT.MPX4.GET_SAMPLING
R
0…200000
Gives the sampling rate in Hz
INPUT.MPX4.LEVEL
R/W
-18.00...+18.00
Internal numerical gain
INPUT.MPX4.LOST
R
"YES" or "NO"
Detection of silence on the input after timeout. If ‘Yes’,
an alarm may be sent depending on the setting for
INPUT.MPX4.ALARM.
INPUT.MPX4.PEAK
R
-
150…150
Gives the deviation max peak value of the transmitted
signal in kHz over 100 milliseconds
INPUT.MPX4.PKMAX
R
-150...150
Gives the deviation max peak value of the transmitted
signal in kHz over 1 second
INPUT.MPX4.PRESENCE
R
MO" or "MO+R" or "MO+R+S"
or "ST" or "ST+R" or "ST+R+S"
Gives the composition of MPX4 on channel 3. R = RDS ;
MO = Mono ; ST = Stereo ; S = SCA
INPUT.MPX4.SW.PRIO
R/W
0..7 ; 0=disabled
Priority of each audio channel (4= highest priority)
INPUT.MPX4.SW.THRESH
R/W
-
90…000
Silence triggering level in dBFS
INPUT.PLAYER.ALARM
R/W
"NONE" or "FAULT" or
"WARNING"
Alarm generated upon loss of signal on the generator
INPUT.PLAYER.DRIVE
R/W
-6.00 to 6.00
Drive setting, allows an increase of the input audio level
without changing the deviation setting.
