ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 203
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
A.3.
Using serial commands
Connect a PC to the front panel serial port as described in chapter 6.
Send the command:
SYS.KEY.ADD
The return value will have the following format:
serial_number
-
key1.
Send this key to WorldCast Systems.
A new key will be returned to you (
serial_number
-
key2
).
Once you have received the new key, send the command:
SYS.KEY.ADD=
serial_number
-
key2
The unit will return:
$OPTION ACTIVATED
If the key is not recognized, the unit will return:
WRONG KEY
In that case you will need to contact WorldCast Systems.
You can check the current options by sending the command:
SYS.OPT.LIST
The unit will return the list of enabled options, including the new one.
