ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 213
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
APPENDIX D:
UNPACKING AND ASSEMBLING THE TRANSMITTER
D.1.
Unpacking and assembly precautions
The packing crate for standard and maritime transport must remain horizontal during transport and handling. Make
sure the Tilt and Shock Watches have not turned red before opening. If they have, refer to instruction labels on the
crate.
The customer is responsible for unpacking the product, and must comply with all applicable safety rules and regulations,
and must follow technical procedures supplied by the seller regardless of its form, so as to avoid physical harm of
material damage.
Weight of the elements packed in the crate:
ECRESO FM 10kW
2000 W FM amplifier (6)
around 13 kg
PSU (between 6 and 8)
around 2.5 kg
Dummy load module (2)
around 19 kg
Rack with exciter(s), control unit, filter... (1)
around 277 kg
Rear panel
Slot filler
Fan frame (with Room to Top configuration only)
ECRESO FM 5kW
2000 W FM amplifier (3)
around 13 kg
PSU (3 or 4)
around 2.5 kg
Dummy load module
around 19 kg
Rack with exciter(s), control unit, filter... (1)
around 264 kg
Rear panel
Slot filler
Fan frame (with Room to Top configuration only)
Please read additional safety precautions available section 1.2.1.
Should you have any question or comment, please contact your WorldCast Systems dealer.
Operator equipment
At least two operators must be present for unpacking and/or moving the product. These operators must wear protective
clothing, specifically loves and safety shoes to ensure their safety.
Requirements
There must be enough free space to host the packing crate
(230x88x160cm)
.
To disassemble the crate, use a drill with a Torx T25 bit, set on
low speed to avoid breaking or stripping the screws. .
