ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 218
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
D.3.
Electrical connection
It is recommended to proceed with the electrical connection before mounting elements which will eventually block
the necessary access.
Depending on the configuration, the connector panel is available either through the rear door or on the front of the
cabinet.
The label “High Voltage”
on the cabinet shows the exact location of the connector panel. You will need to open
the panel on which the label has been set.
Most often, the connector panel is at the rear of the cabinet (Room-top configuration).
•
Unscrew the bottom rear panel to access the connector pannel:
•
As standard, a mains cable is set to exit underneath the cabinet.
If needed, you may feed one through the roof-top cable gland:
With rear panel connector
Or
380 V
AC
380 V
AC
