ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 48
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
4.3.
Using the front panel
Please refer to section 6.2 for front panel working principle.
!
The transmitter must be in local mode before parameters can be modified. Press the Local
button if needed.
The front panel is available in either French or English. To change the language:
From the main screen, press the Check button to display
menus then the down arrow until you see the
About/System menu.
Once you see this screen, press the Check button
Use the down arrow to select the language. Press the
Check button to switch to edit mode, the down or up
arrow to change the language, the Check button to
confirm your choice.
Press the Return button to return to the list of menus.
4.3.1.
Setting the transmitter
Set the power (in W), the frequency (in MHz):
We recommend you set the power to 2 kW to check the transmitter works properly before setting it to the desired
power.
From the main screen, press the Check button to display
menus then the down arrow until you see the TX
Parameters menu.
Once you see this screen, press the Check button
You may now set the frequency. The green frame around
the frequency indicates that this parameter is selected:
press the Check button to switch to edit mode.
Using the arrows to adjust the frequency.
Once you’ve
reached the desired value, press the Check button to
confirm the value. Use the down arrow key to go the next
parameter.
You may now set the power of the
ECRESO
FM
the same
way you set the frequency.
Press the Return button to return to the list of menus.
