ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 54
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
•
MPX configuration
•
Input configuration
Default transmitter pre-accentuation is 50 µs. Depending on your country, you might need to switch it to 75 µs (in the
United States for instance). The Pre-accentuation parameter is available in the Input Source section.
Once values have been changed, click the button
to save the new settings.
4.4.4.
Sound processing
The Sound processing option is enabled for 30 days.
With an audio input, the default preset is ‘5B Natural’. To modify sound
processing parameters, go to the
Transmitter/Modulation/Sound Process page.
To request a permanent license, contact your WorldCast Systems dealer.
4.4.5.
SmartFM
Around 30 days of SmartFM credits have been added to the transmitter.
Go to the Transmitter/Main/SmartFM page to test the option and observe actual benefits.
To request additional credits, contact your WorldCast Systems dealer.
4.4.6.
Getting on air
You may now enable the RF with the button on top of the Configuration page.
You are now on air!
