ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 141
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
Synchro
Path:
Transmitter
/Main/Synchro
This page is only available with SFN and 10 MHz input options when the SFN license is enabled on the transmitter.
For the 10 MHz input option, the optional memory is not present, so the SFN should not be activated and the delay
should not be set.
On this page, set synchronization parameters, including SFN parameters. Please refer to parameter descriptions
section 5.3 for more details
Three indicators show:
Lost synchro
No SFN alarm
Current SFN alarm due to a loss of the external 10 MHz or of the external 1
PPS or due to a difference between the set SFN delay and the measured
SFN delay. This alarm indicates a loss of SFN, not a loss of transmission.
Optional memory present *
Memory required for SFN not present
Memory required for SFN present
10 MHz alarm
No alarm
Current 10 MHz alarm due to a 10 MHz switch
* If the optional memory is not present, no other information is available on the page.
