ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 156
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
8.5.
Setting the RDS data
RDS data can only be set when the RDS license is enabled on the transmitter.
Click the button
to access RDS data pages.
This section displays RDS parameters so they can be updated.
When values have been changed, the button
becomes visible, click on it to save the new settings.
If the transmitter is in local mode (orange indicator at the top of the page), you will not be able to modify settings.
8.5.1.
Static encoder
This page is available when the Static RDS option is enabled.
Please refer to parameter descriptions section 5.17 for more details.
Settings
Path:
RDS
/Static Encoder/Settings
Enter the ID of the main and the alternate DSN.
Check the box ‘Clock time’ to send the time in the 4A group. Specify an
offset if needed.
There is no need to add the 4A group to the group sequence.
