ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 158
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
8.5.2.
Dynamic Encoder
The dynamic encoder can be set using serial commands (see section 7.2.8) or the web interface but not with the front
panel.
PS Scroll
Path:
RDS
/Dynamic Encoder/PS Scroll
Set the PS scroll on this page.
For each line of PS text, set:
•
Text:
Text may include dynamic data (<ITEM….>, <INFO…>…)
that will only be sent if filled in, and for ITEM
type fields if the validity time frame is correct.
•
Repetition
: Then encoder will repeat the line before sending the next one (max: 99 times).
•
Enabled
: Check the box for the line to be sent.
•
Center:
When scrolling is done word by word, the encoder may center each word in the receiver screen. Only
applicable when ‘Word’ is the chosen incremen
t
•
Truncated:
Set the number of scrolling characters. Scrolling may be done by word. In that case, the encoder
will detect whole words (identifiable delimiters are: ‘ ‘, ‘
-
‘, ‘,’), and fit as many whole words as possible on
each screen.
•
Increment:
When scrolling is done word by word, the encoder truncates words longer than the display screen
(longer than 8 characters). Only applicable when ‘Word’ is the chosen increment.
•
Delay:
Time laps between 2 consecutive screens.
